Customize zone types

Device and matrix topologies are defined in AFA using zone types. Each of the network's zones is assigned a zone type, and the zone is represented in the zone type's color in all AFA diagrams and reports. For more details, see Customizing the Device Topology and Customize matrix topology.

If desired, you can define additional zone types. Configuring user-defined zone types enables you to tailor risk profiles to your exact network topology. Each user-defined zone type is based on one of AFA's built-in zone types.

Built-in zone types

Zone Type

Color

Description

Example

External

Red

Represents network zones that are directly connected to the Internet.

The "Outside" zone is assigned to this zone type.

Internal

Blue

Represents network zones that are not connected to the Internet.

The "Inside" zone is assigned to this zone type.

DMZ

Orange

Represents the DMZ (Demilitarized Zone).

The "DMZ" zone is assigned to this zone type.

Back to top

Add and edit zone types

Do the following:

  1. In the toolbar, click your username.

    A drop-down menu appears.

  2. Select Administration.

    The Administration page appears, displaying the Options tab.

  3. Click the Compliance tab.

    The Compliance tab appears, displaying the Risk Profiles sub-tab.

  4. Click .

    The Edit and define zone types page appears.

  5. Do one of the following:

    • To add a new zone type, click New.
    • To edit an existing zone type, select the desired zone type and click Edit.

    The Add New Zone Type or Edit Zone Type dialog box appears.

    Note: You cannot edit the built-in zone types (EXTERNAL, INTERNAL, or DMZ).

  6. Complete the fields using the information in the following table.

  7. Click OK.

Back to top

Delete zone types

Note: You cannot delete a zone type if it appears in a defined device's topology.

Note: You cannot delete the built-in zone types (EXTERNAL, INTERNAL, or DMZ).

Do the following:

  1. In the toolbar, click your username.

    A drop-down menu appears.

  2. Select Administration.

    The Administration page appears, displaying the Options tab.

  3. Click the Compliance tab.

    The Compliance tab appears, displaying the Risk Profiles sub-tab.

  4. Click .

    The Edit and define zone types page appears.

  5. Select the desired zone type and click Delete.

    A confirmation message appears.

  6. Click OK.

The zone type is deleted.

Back to top