Remove Devices

You can remove devices from the graphic network map: from the current map calculation and/or from all future map calculations. If you only remove the device from current map, the device will appear in the map again once a new report is generated.

Note: A removed device will not appear in traffic simulation query results.

Get the Device ID

  1. Get the DeviceID of the device you wish to remove by right-clicking the device in the network map and selecting Routing Information.

    For example, the DeviceID is the Firewall name. For example,

    # Firewall name: Begonia_SRX

    Note: When the Routing Information option is not actionable, Find the Device ID in the database.

    Back to top

Remove Device

Do the following:

  1. Open a terminal and log in using the username "afa" and the related password.
  2. To remove devices from the current map, Enter the following command, where, DeviceID is the name of the device you wish to remove from the current graphic network map. :

    fa_map -d DeviceID

    Back to top

Omit Device from all future map updates

Do the following:

  1. Open /home/afa/.fa/config.

  2. On a new line, add the configuration parameter MAP_BLACK_LIST, and set the parameter's value to a list of devices (semi-colon separated) that you wish to remove from the graphic network map.
    For example, the following removes the devices rose_checkpoint and flower_asa from the graphic network map, for all future maps.

    MAP_BLACK_LIST=rose_checkpoint;flower_asa

  3. Save the file.

    Back to top

Find the Device ID in the database

If the Device ID is not available using the method described in Get the Device ID find the device ID in the database.

You can find the Device ID by Device Name in the postgres database, using:

  • schema: map

  • table: Device

  • field: DeviceName

Back to top