Integrate ASMS and CyberArk

Relevant for: AFA Administrators

ASMS integrates with CyberArk Vault, allowing ASMS to access devices without directly storing device credentials within ASMS. After configuration, ASMS connects to CyberArk to obtain device credentials for monitoring, scheduled analysis, or ActiveChange purposes.

The process of credential retrieval remains transparent to the user.

As the number of devices in AFA increases, the integration of ASMS and CyberArk becomes increasingly valuable for efficient credential management.

Note: When integrating with AFA, credentials for syslog collection still need to be provided separately to AFA.

ASMS and CyberArk integration architecture

The following image shows an example of an ASMS-CyberArk integration, with ASMS in a Geographic Distribution and High Availability architecture.

The CyberArk integration is supported for:

  • Standalone ASMS installations
  • Dual-machine setups, functioning in either High Availability or Disaster Recovery configurations
  • A Central Manager with one or more Remote Agents.
  • Any combination of the last two architectures

Note: The CyberArk AIM agent must be installed on each of the ASMS machines or Remote Agents, as each ASMS machine will need to connect to the devices they manage, and require CyberArk credentials.

Back to top

Supported devices for CyberArk integration

CyberArk integration is supported for the following device brands:

  • Fortinet FortiManager
  • Juniper Netscreen
  • Cisco ASA
  • Cisco Nexus
  • Cisco IOS
  • F5 BIG-IP LTM and AFM

Note: For details about supported versions of CyberArk, contact your AlgoSec customer representative.

Back to top

Configure CyberArk AIM for ASMS access

Before using CyberArk in ASMS, you must enable ASMS access in CyberArk. This procedure describes how to define an application ID and application details for ASMS in CyberArk's Password Vault Web Access (PVWA).

Do the following:

  1. Log in to the PVWA as a user with authorization to manage applications. Add an application, and name it Algosec_AFA.

  2. Enable the Allow extended authentication restrictions option for the Algosec_AFA application you created. This enables you to specify an unlimited number of machines and Windows domain OS users for a single application.

  3. Specify the application's Allowed Machines, and include any of your ASMS machines. This ensures that ASMS can access credentials managed by CyberArk from any machine in your system.
  4. After the installation of the AIM agent, run the following:

    1. Add CyberArk sdk to java classpath:

      ln -s /opt/CARKaim/sdk/javapasswordsdk.jar /opt/apache-tomcat/lib/javapasswordsdk.jar
    2. Verify by running:

      ll /opt/apache-tomcat/lib/javapasswordsdk.jar
    3. Restart the ms-metro service:

      service ms-metro restart

For more details, see the CyberArk documentation .

Back to top

Configure CyberArk accounts and permissions

This procedure describes how to ensure that CyberArk accounts and permissions are configured as needed for the ASMS integration, and is performed in the CyberArk Vault.

Do the following:

  1. In the CyberArk Password Safe, provision any privileged accounts required by the Algosec_AFA application. For each account, make sure to add the Add accounts permission.
  2. Add the Credential Provider and application users as members of the Password Safes where the application passwords are stored.
  3. Add the Provider users as a Safe Member, with the following permissions:

    • List accounts
    • Retrieve accounts
    • View Safe Members

    Tip: If you are installing multiple Provider users, we recommend creating a group for these users and adding the group to the Safe with the required permissions.

  4. Add the application, using the APPID, as a Safe Member with the Retrieve accounts permission only.
  5. Additionally, provide the Provider user and the application with the Access Safe without Confirmation permission, if your scenario complies with all of the following:

    • Your environment is configured for dual control
    • You have a PIM-PSM environments version 7.2 and lower
    • The Safe is configured to require confirmation from authorized users before passwords can be retrieved

    This is not required for Privileged Account Security solutions versions 8.0 and higher.

For more details, see the CyberArk documentation .

Configure CyberArk integration

This procedure describes how to configure specific devices to be authenticated via a CyberArk vault. When configured, the CyberArk configuration fields appear for those devices in the DEVICES SETUP page.

Do the following:

  1. Complete the integration configuration on the CyberArk side. For details, see:

  2. In the AFAAdministration area, navigate to the Options > Authentication tab.

  3. Scroll down to the CyberArk area, and select the Allow to setup devices with CyberArk credentials management checkbox.

  4. (Optional) Define default values for all devices authenticated via CyberArk, as follows:

    Platform (Policy ID)

    Enter a default CyberArk Platform.

    Safe

    Enter a default CyberArk safe.

    Folder

    Enter a default CyberArk folder.

    Default : root

  5. Click OK to save your changes.

    From now on, CyberArk options will appear in the DEVICES SETUP page for all relevant device brands.

  6. (Optional). Configure CyberArk system notifications. The following parameters are disabled by default:

    • cyberark_connectivity_health_check - Tests the connectivity between ASMS and the CyberArk vault.
    • suite_cyberark_aim_service – Checks the status of the CyberArk AIM service (aimprv) running on the ASMS host.

    For more details, see System monitoring notifications.

  7. Configure the specific devices you want to authenticate via CyberArk, either one at a time or in bulk.

    For details, see:

  8. Configure the CyberArk Application Access Manager (AAM) agent on all ASMS hosts and configure it to communicate with the CyberArk vault. If you're working in a distributed environment, make sure to configure the AIM agent on all hosts in your system, including the Central Manager, Remote Agents, secondary nodes of all clusters, and so on.

    For more details, see the CyberArk documentation .

Back to top

Troubleshoot CyberArk integration

If you have any issues with the CyberArk integration, see logs in the /var/opt/CARKaim/logs folder.